HID Bi-Xenon Projector Lens Light (3.1 inch G3)

Product Description

HID Bi-Xenon Projector Lens Light (3.1 inch G3)

Parameters Of Lamp:
Bulb Type: Bulb Type: H1/H7, H4, 9004/9007, 9005/9006
Start Voltage: 23KV
Rated Power: 35W.
Color Temp: 4, 300K - 12, 000K
Lumen: 2800LM
Bulb Life-Span: 3000Hrs

Small size, low light brightness, double and further irradiation distance.
Exquisite angeleyes and durable temperature, up to 20, 000 hours life-span.
Lenses improve light utilization to solve the astiamatism problem.
Adapting space technology to promotoe pulsed electromagnetic and hi/lo light change speed; U. S. Regulatory cut-off line.
Easy installation and unnecessary to damage the headlight.

Angeleye Power: 3-5W (White/Red/Yellow/Blue/Green)
7-Color background switch (White/Red/Blue/Purple/Green/Yellow/Cyan)

Attention!
1. Confirm lamp specification and select the appropriate projector headlight to modify.
2. Headlight which pressurized with cold glues or front transparent cover made of glass prism is not suitable to modify.
3. Estimate the reflector size and make sure there is enough space to install the projector headlight.
4. Install the product correctly and by the technician.
5. Heat up the headlight cover evently to disassemble the headlight cover. Do not overheat to avoid deformation. When heating, cover up the dustproof cover and seal the opening for turn signal lamp and parking(position)lamp.
6. Protect the disassembled headlamp to avoid dust and dirt.
7. Wear the gloves when installation to avoid touching the reflector.
8. Use the exclusive sealant to seal the transparent headlight cover. Do not use glass adhesive or silicon-based adhesive for substitute to avoid fog inside the headlight and coloring of the transparent headlight cover.
9. Inject sealant fully in the ditch of headlight cover, and restore the headlight cover tightly to avoid water leakage.
10. Before clearing out the excess sealant, place it to ventilate for an hour.
11. Avoid driving out the rain or car wasting for at least 12 hours after installation.
12. Be cautious for electric shocks when the voltage reaches 23kv to start.
13. Start the engine before turn on the light, to avoid electricity shortage as engine start.
14. Caution! High temperature! Do not touch the bulb when lighting. Avoid eye damages.
15. Be careful with burning and keep away from inflammable and explosive objects.
16. Do not modify or change the projector light. Do not disassemble the projector light by oneself. Any damages caused by modify, change, or disassemble the projector lights are excluded from the warranty.